Pullnose
- A pullnose belt consists of a static entry and an exit which is retractable at belt level.
- When the nose is retracted products may be deposited (pullnose deposit) or ejected, e.g. after a metal detector or before a storage unit (product flow regulator).
- Dual pullnose: Two pullnoses opposite each other in the same line may be used to separate products or to form rows. This way, a continuous flow of products or product groups (batches), e.g. from a molding unit or the biscuit oven, may be separated into single rows, which would later allow for a reliable discharge of such single rows by Cross feeding stations.
- A manually operated pullnose may be ideal when the machine is at a standstill, in order to generate a passageway in the line, e.g. for maintenance operations or the handling of pallets.
- Benefits
- Specification
- Options
- Fotos & Videos
- Data Sheets
- Easy and efficient separation of products
- Highly reliable due to simple technology
- Good directional stability of the belt
- Easy and fast belt changes (approx. 30 min)
- Transport even of very small products thanks to belt intersections with small end rollers
| Lift drive: | pneumatic | belt drive | crank drive |
| Row count | up to 40 r/min | up to 150 r/min | up to 180 r/min |
| Closing speed | up to 30 m/min | up to 60 m/min | up to 90 m/min |
| Belt speed | up to 60 m/min | up to 60 m/min | up to 90 m/min |
| Belt width | up to 1800 mm | ||
| Diversion roller | Ø 7, 10, 14 mm | ||
| Stroke | selectable up to 250 mm | ||
| Belt load | up to 8 kg/m2 |
- Pullnose with spindle or crank drive (servo motor), pneumatic or with hand crank
- Belt drive with servo motor
- Knife edge Ø 6 mm
- Sub-frame on rollers, mobile
- Stainless steel model
- Other options on request
|
|
Zürcherstrasse 42